Viking shield

Viking shield revisited

Back in 2014 I made my first Viking shield using wood that came from an industrial pallet that I had left up in my attic for about 10 years. The shield looked really good however I was never quite happy with it and I ended up putting the shield back up in the same attic that I had stored the timber for so long.

So a few weeks ago, I decided I would take the shield down and redo it the way I wanted it to look. Maybe I could hang this on my wall and not be ashamed of it. Even though I say it myself, the workmanship was really good and the fact the wood was warped, cracked and split, really suited the shield perfectly. The worst thing for me however,  was the shield boss which I made from a Fray Bentos pie tin that fitted into a fabric covered ring I made from a piece of partial wood.  At the time, I had no access to metal plate that I could make a shield boss from. I also had very little money and no workshop. So I made the shield and the boss out of whatever materials I had at hand. In fairness, it was a really good way to recycle materials that would otherwise be thrown in the bin, even if it was the recycle bin at that. For anyone that does not know, the boss is the metal dome in the center of the shield that is used to protect the hand while holding the shield in battel.

As you can see in the photo above, the finished boss on the right looked ok if you had never seen a Viking shield before. But I was just not happy with it and felt it took away from finish, feel and look of the shield project. Now this shield was always just an art project, but could still be used in a re-enactment Viking battle.

So, when I was back home in Donegal, I found an old copper water cylinder and thought this would be ideal to finish off what was then my abandoned project. I cut the cylinder up into square sheets and flattened them out. I then made my new boss from a sheet of the bronze copper that I cut and hammered it out using a warrington ballpein hammer on a large log that I hollowed out to make a dish shape. I also used on old canon ball as an anvil to give it shape. The canon ball I dug up in a garden in Dublin Ireland, years ago.  Never really thought about it till now, but just wonder what the story behind the canon ball is?
 

When the boss was finished, I then got it professionally distressed and aged, so it would look the part. It turned out very good although I would have liked a little more Verdigris. Verdigris is the blue green oxide that aged bronze and copper has, as in the photo below.

So after a little bit of work, the new boss was ready to replace the fray Bentos pie dish.

So I went ahead and attached it to the shield, but it still didn’t look the way I wanted. Sorry, I did not take a photo

So I got out my rarely used carving chisels and started giving some texture to the wood. I then aged it and even got a blow torch to it and scorched some of the wood.

So this is the finished shield. I’m not 100% happy with it and I might age this in the future. I am also not happy with the edging as Viking shield would have used raw hide leather, but it does kind of looks the part.

It is what it is, so I am reasonably happy with the finished shield. 

New Poem, Sitting on the lawn.

Sitting on the lawn.

 An unfinished poem   By A.M.Donaghey 

Heavenly scented summer breeze, grassy carpet of outdoor leisure

On drowsy days of lemonade, and effervescent pleasure

Dandelions and camomile, stipple through a vale of green

Grass with seed and flower heads, all weighting for a preen

Taste of sweetness, summer fruits, that tantalize the tongue

and coolness ice cubes in your mouth, that almost quench the sun

Shadows of the summer leaves that swirl an flicker through the air

moments, minutes and hours pass by, and all with out a care

Singing birds and buzzing bees, insects on the wing

Dream like in this warmth of light, and memories that they bring

How id love to be there now, feel that summer breeze of pleasure

On those drowsy days of lemonade , the childhood times I treasure 

As it is coming into September and we are seeing the last few days of our Irish summer, I thought I would try and finish a poem that I started writing last year. As always, I am not 100% sure if it is fully finished and I may re write it in the future.

As always, thank you for reading my blog and please feel free to comment if you wish,

Evidence Art project

Evidence  Art project

Here is my finished art peace called Evidence. 

It was painted a few years ago as a college assignment and although it  is a few years old now, I didn't get to completely finish it the way I wanted to at the time. So today I took it down from my loft were it was exposed to extremes of temperature of cold in the winter and boiling hot in the summer. So I am sure you can imagine that it is not in the best of shape.

My idea at the time was to paint a picture of myself looking into a window and each section of window was to be painted in a different style or colour. However, my tutor at the time, was not really happy with this idea, although to be honest, I think I just didn't explain my idea properly.

So instead, I created this as a series of self portraits that I painted in the negative over an eight day period. As you can see the first one or two portraits were not so good, but each day I did a painting, I started to get better and more confident with my brush work. I have to say, my favourite one is the top right painting as the brush strokes are loose and getting more confident. I painted the portraits as negatives, as I felt at the time unhappy about my art and to be honest I still do to a degree.  The frame of this painting is covered with photos of family and ancesters as well as copies of census forms that recorded my great grand parents.

To finish this peace, all I really needed to do was put some of the wood features of the window in and that's it. Not sure if it adds to the art, however, this was taken before I coloured the frames white, so at this stage it looks out of place.

Anyway, that my finished Evidence painting

The sculptural part of this project was the Evidence chair that I featured on this blog before, but here is a photo anyway.

Until next time, thank you for reading my blog and please feel free to make a comment.

Blind Carving part 1 New Sculptural Wood Carving

Blind Carving part 1     New sculptural wood carving from a wooden pallet

When I moved into my new house over 10 years ago, the builders had left a wooden pallet in the back garden. At the time I was still a cabinetmaker and me being me, I just couldn’t let the timber go to waist. I took the pallet apart and all the good timber, or at least what looked good at the time, I put up in the loft for a possible future project. Now over ten years later, I have finally decided to do something with all that timber. So I have taken all the wood down form my loft and I have got to say, the timber is not very good at all. Over the years it has dried out, cracked and warped, but I think I will use the roughness of the timber as part of the sculpture.

 So I have been thinking about making myself a Celtic shield for about 15 years and was even going to make it out of old copper pennies, and that got me thinking about Irish coins. So I have decided to make my wood into a giant coin that I can hang on the wall. The coin I have chosen is the old pre. decimalisation Florin which became the Irish 10p when we joined the EEC.

So this is the coin I will try and make from my very rough timber.

This is the timber that I have laid out and I have decided to do the work very rough as this will reflect how bad the wood is and also, the truth is I cant find my wood carving chisels as they are stored in the loft and to be honest, there is so much stuff up there, it would take me ages to find them. I also think that doing it in a rough way, will make it look old and hopefully will suit the wood I am using.

So this is how I will carve it and it will be in nine sections. I am going to blind carve each length. When I say blind carve, I mean that I will carve each length independent from the other, so the sections may not even match each other. Hopefully this will look good and the imperfections will reflect the warped and cracked wood I am using.

So this is the timber tacked together with Rocky2 my boxer dog in the foreground to give scale.

So to work I will go and I will update my progress as I go.