Viking shield

Viking shield revisited

Back in 2014 I made my first Viking shield using wood that came from an industrial pallet that I had left up in my attic for about 10 years. The shield looked really good however I was never quite happy with it and I ended up putting the shield back up in the same attic that I had stored the timber for so long.

So a few weeks ago, I decided I would take the shield down and redo it the way I wanted it to look. Maybe I could hang this on my wall and not be ashamed of it. Even though I say it myself, the workmanship was really good and the fact the wood was warped, cracked and split, really suited the shield perfectly. The worst thing for me however,  was the shield boss which I made from a Fray Bentos pie tin that fitted into a fabric covered ring I made from a piece of partial wood.  At the time, I had no access to metal plate that I could make a shield boss from. I also had very little money and no workshop. So I made the shield and the boss out of whatever materials I had at hand. In fairness, it was a really good way to recycle materials that would otherwise be thrown in the bin, even if it was the recycle bin at that. For anyone that does not know, the boss is the metal dome in the center of the shield that is used to protect the hand while holding the shield in battel.

As you can see in the photo above, the finished boss on the right looked ok if you had never seen a Viking shield before. But I was just not happy with it and felt it took away from finish, feel and look of the shield project. Now this shield was always just an art project, but could still be used in a re-enactment Viking battle.

So, when I was back home in Donegal, I found an old copper water cylinder and thought this would be ideal to finish off what was then my abandoned project. I cut the cylinder up into square sheets and flattened them out. I then made my new boss from a sheet of the bronze copper that I cut and hammered it out using a warrington ballpein hammer on a large log that I hollowed out to make a dish shape. I also used on old canon ball as an anvil to give it shape. The canon ball I dug up in a garden in Dublin Ireland, years ago.  Never really thought about it till now, but just wonder what the story behind the canon ball is?
 

When the boss was finished, I then got it professionally distressed and aged, so it would look the part. It turned out very good although I would have liked a little more Verdigris. Verdigris is the blue green oxide that aged bronze and copper has, as in the photo below.

So after a little bit of work, the new boss was ready to replace the fray Bentos pie dish.

So I went ahead and attached it to the shield, but it still didn’t look the way I wanted. Sorry, I did not take a photo

So I got out my rarely used carving chisels and started giving some texture to the wood. I then aged it and even got a blow torch to it and scorched some of the wood.

So this is the finished shield. I’m not 100% happy with it and I might age this in the future. I am also not happy with the edging as Viking shield would have used raw hide leather, but it does kind of looks the part.

It is what it is, so I am reasonably happy with the finished shield. 

Second Viking shield FINISHED

Second Viking shield FINISHED

I am glad to say that I have finished my second Viking shield and it turned out quite good. Typical of me, that I am not 100% happy with it, but then again I never am happy with my work. But that's me in a nut shell I suppose.

So this is the finished Viking shield, that has been aged and ready to be hung on the wall.

It took me ages to paint the design and when it was almost finished I realised it looked more Roman than Viking. I then looked at a few books on my bookshelf and decided that a few Celtic designs from the Book of Kells would look good in the medallions and I am hoping that it looks more Viking now.

I used natural earth colours like burnt umber and yellow ochre as these colours would have been available a thousand years ago. The green colour was made up with yellow ochre and some copper oxide. Once I was reasonably happy with the painting, I then aged it and put a few coats of wax over it all. There is a slight brown colour to the wax which gives it a rough antique finish which is what I was looking for.

I then pined and nailed the boss on to the shield before putting the handle on the back. I decided to pad the boss with some of the jute webbing as I feel this gives it the look and feel of a real usable Viking shield. This shield was however made and designed as an art piece, but I am confident enough that it would work well as a re-enactment Viking shield, although I am sure it would get destroyed in battle.

Over all, I am happy with this project and am fighting the urge to build another few shields. I think my next project will be to finish a self portrait piece that I made when I was in college a few years ago. The portrait is called Evidence and although I got a distinction for it, I never got round to putting a few final finishing touches to the piece.

So until next time, thank you for reading my blog and please comment if you wish.

Blind Carving part 4. New sculptural wood carving from a wooden pallet. Finished

Blind Carving part 4.   Finished 

New sculptural wood carving made from a wooden pallet 

 

 

Finished with clear wax

 

 Brown wax makes it look less grey and warmer

 

 

The finished blind carving, hung on my kitchen wall.

This is the finished blind carving that I made from an old wooden pallet.

As you can see it turned out OK considering how bad the wood was. All the sections married up and they match well, which was a surprise as each piece was carved blind from each other.

You can also see how the wood reacted with the iron oxide vinegar mix and also how the brown wax made it look warmer.

Now its time to plan another project, so if anyone has any suggestions, please feel free to leave in the comments.